Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
britax poplar newborn Britax Poplar S Convertible 2-in-1 Car Seat with ClickTight – Baby GrandReady to go with room to grow! The Poplar S convertible car seat takes the stress out of moving to the next car seat stage thanks to the patented ClickTight installation and slim SpaceSaver design. This convertible car seat accommodates up to 50 lbs when installed rear facing, allowing your child to ride rear facing longer. It easily switches to a forward facing car seat as your child grows, accommodating up to 65 lbs. ClickTight technology provides
Ready to go with room to grow!
The Poplar® S convertible car seat takes the stress out of moving to the next car seat stage thanks to the patented ClickTight® installation and slim SpaceSaver™ design. This convertible car seat accommodates up to 50 lbs when installed rear-facing, allowing your child to ride rear-facing longer. It easily switches to a forward-facing car seat as your child grows, accommodating up to 65 lbs.
ClickTight technology provides fully open seat belt paths that are clearly labeled and easy to access, and the automatic tensioner takes care of the tightening. This baby car seat lets you easily adjust the 14-position no-rethread harness and headrest to help create the perfect fit.
The premium inserts also help provide refined comfort and a tailored fit. The ReboundReduce™ stability bar easily attaches to the car seat when installed rear-facing, helping to minimize movement in the event of a crash. Slim outside and spacious inside, this convertible car seat features 17-inch SpaceSaver™ technology designed to fit 3-across* without compromising on trusted Britax® safety and premium comfort.
The rear-facing car seat includes a patented SafeCell® crumple zone and a V-shaped top tether to help manage crash energy. Carbon steel frame and belt paths provide strength and stability. The car seat cover fabrics are naturally flame-retardant with no added FR chemicals, and they’re safe to machine wash and dry time and again.
*Britax cannot guarantee 3-across installation fitment in all vehicles
- Convertible Design: Works as a rear-facing car seat with the infant insert and converts to a forward-facing car seat as your child grows
- Fit: Rear-facing 5-50 lbs; Forward-facing 30-65 lbs. *Due to regulatory changes, weight and height ranges may vary by model. Always follow the weight and height specifications listed in your product's user guide and on your product labels.
- ClickTight® Installation: With ClickTight, you know it’s right in just 3 easy steps: open, thread and buckle, click it closed
- ReboundReduce™ Stability Bar: Carbon steel bar easily attaches to the car seat when installed rear-facing to minimize the movement in the event of a crash; must be removed when installed forward-facing
- SpaceSaver™ Design: Slim 17" seat is designed to fit 3-across without compromising on trusted Britax® safety and premium comfort. *Britax cannot guarantee 3-across installation fitment in all vehicles
- Infant Insert: Specifically helps to properly position newborns
- 5-Point Safety Harness: Helps evenly distribute crash energy to keep your child safe
- Patented V-Shaped Top Tether: Has 2 connection points to help slow and reduce forward movement in a crash; easily stores away when not in use
- Easy-Read Level Indicators: The 6-position and quick-adjust recline helps you find the most comfortable fit for your child and the best fit for your vehicle
- Naturally Flame-Retardant Fabrics: With no added FR chemicals
- SafeCell® Technology: Acts as a crumple zone, helping to keep crash energy away from your child
- Easy-Adjust Harness: The 14-position no-rethread harness and headrest move to help create the perfect fit
- Carbon Steel Frame: Reinforces the seat structure to help keep it sturdy and stabilized
- Flip-Forward Buckle Pad: Stays out of the way for easy boarding
- Washer and Dryer-Friendly: No more hand-washing or waiting for the cover to air-dry; just quick and easy cleanup, so you can keep moving
- Dishwasher-Safe Cup Holders: The 2 cup holders slide in and out for easy cleaning between rides
Usage
- Newborn to 50 lbs.
Specifications
- Dimensions: 23.5"H x 20.5"D x 17"W
- Product weight: 28 lbs.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 322 reviews
Sort
Product Reviews
★★★★★ 5
Just buy the dang thing!
Style: 68oz｜Modern Styles, Style: 68oz｜Modern Styles
Read no other reviews. Just buy it. It’s inexpensive, easy to use, clean, and makes a great cold brew! I took it on vacation to the beach and one batch lasted me all week! Also saved me $$$. Buy it!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
★★★★★ 5
It Does a Great Job!
Style: 51oz｜Straight Styles
This brewer is great for cold brewing loose teas. Is glass and Stainless Steel, so no micro trash.
The glass is very delicate so handling needs to be careful.
Great product. I bought another one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Makes Fantastic Cold Brew. Thoughtful Design. Slightly Frail, But Approaches Perfection.
Style: 51oz｜Conical Styles
When I looked for a dedicated cold brew pitcher, I had a few conditions. Mainly I wanted to avoid plastic at all costs. I needed a pitcher that would be easy to clean and simple to use, without pointless bells and whistles. Finally, I wanted a pitcher that could fit in my fridge without issue.
This pitcher achieves all that and then some. Borosilicate is the same stuff Pyrex used to make its glassware from, a material renowned for its durability especially when exposed to quick temperature shifts. I knew it was overkill, but such material would surely fit the bill. And glass wouldn't affect the flavor of whatever coffee I'd brew in it.
The grind holder is made from stainless steel, with a fine mesh that largely prevents sediment from getting into the coffee. It does allow smaller particles to get through, but they settle to the bottom. Overall I can't complain.
The grind holder is suspended by a rubber ring which also locks the pitcher's lid in place. This forms a nice little seal that seems to help prevent leaking. Obviously there is no vacuum capability here, but it feels sturdy and like it won't let anything in or out once the grind holder is in.
Pouring is easy and accurate. I remove the lid and grind holder, then pour. There's never any spillover nor dripping. The pitcher has a good, well-crafted pouring tip.
Brewing with the pitcher takes a bit of practice. First I dump old grinds if necessary, then fill the grind holder roughly 3/4 of the way with cold brew grinds. BEFORE I place the grind holder into the pitcher, I fill the pitcher with water about 2 inches below the max line. After that, I place the grind filter into the pitcher then slowly press down on the grinds to flatten and wet them. Finally, I slowly pour water in to hit the max line, flattening the grounds as I do.
While the pitcher has notches to determine how much liquid it holds, I don't find that feature helpful because I only use the pitcher with a grind holder which boosts the liquid. I imagine the notch lines may be more helpful for someone using this as a standard pitcher without the grind holder in place.
I've accidentally overfilled this pitcher many times before deciding the best way, in my opinion, to handle it as described above. I've tried placing the grind holder in and then pouring all of the water over the grinds. But because grinds have a tendency to rise and overflow, that method proved messy and ineffective. This is why I add most of the water first, then only add a very small amount of water AFTER putting the grind holder into position just to top it off.
So how good is the cold brew? After trying a few different approaches, I now brew mine in the fridge for convenience, letting it steep for about a week to make a nice dark roast concentrate with Bizzy Organic Dark & Bold grounds. The result is stellar, easily better than any coffee place cold brew I've had in the past couple of years.
Filled to the max line, a full pitcher lasts me about 2 weeks when I have about an inch of coffee per day. I've found cold brew concentrate to be an extremely economical way to stretch costly grinds while creating the richest flavor and this pitcher is a key part of that. With this approach, I'm a happy customer.
One thing I like to do while brewing a new batch of coffee is pouring about 1/3 of the brewed coffee into a tall cup and finishing that while brewing. This method has worked perfectly for me, as I have a new pot of coffee by the time I'm done with the old one.
One thing to point out is that the pitcher is fairly big and the glass is relatively thin. And so I have always hand washed all parts of this pitcher, which has proven straightforward enough. While borasilicate and stainless steel should be dishwasher safe, this has become too important a piece of equipment for me to start playing around with. So I'm not the person to say how well it holds up in a dishwasher. My outlook is to treat this pitcher with the care it deserves and to be rewarded with its offerings for as long as possible.
Overall the pitcher is an all-star at making the coffee I enjoy, being so simple to use that it becomes easy to take for granted. It is almost a trouble-free piece of kitchen hardware and has already paid for itself through sheer convenience. The quality definitely feels top notch, although the thinness of the glass means it needs to be treated with the care and respect it deserves.
I would feel very comfortable recommending this product to almost anyone serious about making a quality cold brew at home.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2020
★★★★★ 4
Better than expected (Updated)!
This is a simple and effective solution to making a good cold brew. Too bad the process takes forever (no fault to the product).
BUT if you want a stronger taste, after using purified cold water (try to get beans wet), let it sit out for 12 hours or longer but then place in the fridge and you'll notice it darker and richer.
It is impossible if you think some ground beans won't end up in your coffee, they will BUT when you pour, as long as you leave the metal ring in, a little bit of coffee (water) and the beans usually get stuck and don't come out. If you're really nuts about it, you can use a cheese cloth but a bit of grounds won't hurt you and not sure you'd really taste it as it's so fine, barely noticeable.
Those who keep braking the glass? You must use cold water if you immediately start cleaning the pot. Do NOT run under hot water while the pot is cold, you or course will shatter the glass at some point.
Update (07/29/2020)
I am still using this product and no issues with it. But it does leave the coffee grounds smell to it no matter what beans I use, so wash with soap after every use.
Be sure to know, water will evaporate and also get soaked up in the coffee beans, so adding a little more water above Max may be helpful. Also, pro tip, when you take out the insert with the beans, put it over the lid and tilt it and let it rest for 3 Mins so all the water from the beans pours out, do NOT force it with your fingers as you'll get more grounds and will have a harsh flavor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2020
★★★★★ 5
Great for iced tea and easy to use
Style: 51oz｜Conical Styles
I use this for making iced tea and it works perfectly. You can use tea bags or loose-leaf tea, and both come out great. It’s easy to fill, strain, and clean, and I like that I can just keep it in the fridge and pour as I go. The airtight seal keeps everything fresh. Super convenient and a staple for my fridge now
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 3, 2025